Unpacking Method - icetro SSI-300T User Manual

Unpacking method

The Ice Cream Dispenser has been fully inspected and tested at the factory prior to shipping.
If you detect damage to the wooden package or apparent distortion of the shape of the system
after unpacking the product, immediately inform your distributor or manufacturer.
Find the serial number marked on the packing and the machine before starting installation.
Inform us of the serial number if you have any inquiry. Request the dealer or service provider
for assistance when the machine is to be moved.
1. Remove the wooden packing, taking care not to damage the exterior of the Ice Cream
Dispenser.
2. Remove the wooden packaging and the protective tapes and make sure that all parts of
the system are complete.
※ When tilting or moving the machine, take care not to overturn the machine.
Location and Precautions for Installation
●
1. Avoid sloping or irregular surface.
- Installation on a sloping or an irregular surface may result in machine overturning, malfunction,
or failure.
2. Avoid direct sunlight, rain, snow, and wind.
- Otherwise, fire or electric shock may occur due to the ice cream or rain water.
3. Avoid the direct influence of sea wind and hazardous gases.
- Ice cream buyers may complain or file a claim.
8