Cleaning Method - icetro SSI-300T User Manual

Cleaning method

1. Press the wash button on the control panel.
(Wait until the soft cream in the cylinder is melted,
About 10 minutes.)
2. Remove the mixing tank cover and Take out the
caburator tube and caburator body.
3. Remove the soft cream liquid in the mixing tank and
pour faucet water into it.
Repeat it two or three times until you get clean water from it.
4. Clean up the inside of the mixing tank with
a soft towel and neutral detergent.
5. Brush around the level sensor.
(The level sensor of the 151TG model is on
the left-hand side.)
The carburetor, impeller, and ice cream discharge port shall be cleaned once a day.
caution
32
level sensor