Button Display Names And Functions - icetro SSI-300T User Manual

Button display names and functions

Button display names and functions
"Left Status Display Window"
AUTO: Displays the operational status.
Defrost: Display the defrost condition.
Revive: Displays the revival condition.
Sterilization: Displays the sterilization status.
and Buttons
The and buttons are used to
change the setting in the upper status
display window.
Press the and buttons at the
same time for five seconds to lock or
unlock the touch buttons.
"Select" button
It is used to check the temperature
in the lower status display window.
Buttons sense the touch of people(electric capacity), so press them slightly.
Also, buttons are placed narrowly each other. So when you press a button, the adjacent button can
For your
be pressed.
information
If you press the buttons hard, internal malfunction can occur, or the buttons won't function.
"Insufficient Ingredients" lamp
It blinks when there are insufficient
ingredients.
"No Ingredient" lamp
It blinks when there is no ingredient.
"Stand-by" button
It is used to stand by with ingredients
stored in the cylinder and hopper.
"Auto" button
It is used to produce soft cream.
"Ref" button
It is used to store ingredients.
"Wash" button
It is used to wash the machine.
"Right Status Display Window"
Displays the percentage of soft cream formation in operation.
2-1: Displays the soft cream temperature in the storage tank.
2-2: Displays the ingredient temperature inside the cylinder.
2-3: Displays the condenser suction temperature.
9
19