Caburator Control - icetro SSI-303SN User Manual

Caburator control

The carburetor is consisted of two parts.
The part that is inserted into the hole of the mixing tank is called
the body and a tube is inserted into this.The tube has a hole at the
top and at the bottom. It can't be inserted in the reverse direction.
If you align the no hole of the upper area of the caburator body with
the area having no hole in the upper area of the tube, then the hole
in the lower area of the caburator body will be blocked.
Condition of use: Initial soft ice cream making
Align the large hole of the upper area of the caburator body
with the large hole in the upper area of the tube. Decrease the
overrun and increase the amount of ingredients injection in this
way when you need continuous vending of the product.
Condition of use: When the "AUTO" mode is executed
Align the small hole of the upper area of the caburator body with
the small hole in the upper area of the tube . Then, it will be
aligned with the small hole in the lower area of the caburator body.
Increase the overrun and decrease the amount of ingredients
injection in this way when you expect a small amount of sales.
Condition of use: When the "AUTO" mode is executed
Align the medium hole of the upper area of the caburator body with the
medium hole in the upper area of the tube. Then, it will be aligned with the
medium hole in the lower area of the caburator body.
It will make the overrun and the amount of ingredients iinjection at medium
level for sales
Condition of use: When the "AUTO" mode is executed
A small hole can improve the overrun, but it may depend on the amount of ingredients in
the mixing tank. The fewer ingredient is in the mixing tank, the higher the overrun becomes.
For your
The more the ingredient is, the lower the overrun becomes.
information
21