Sending Far-End Audio To Loudspeakers And Other Sources - Shure IntelliMix Room Manual

Sending Far-End Audio to Loudspeakers and Other Sources

1. Go to Matrix mixer.
2. Find the far-end signal, which comes to the software through the Virtual Audio Input.
3. Check the box where the Virtual Audio Input and the destination intersect. You can also adjust crosspoint gain here.
Common destinations include:
◦ PC audio output (3.5 mm or HDMI connector): Go to Schematic view and click PC Output. Choose an output
from the menu. Display speakers connected by HDMI cable or the 3.5 mm connector are common options.
◦ Dante output destinations (loudspeakers or Shure ANI, for example)
Using Videoconferencing Software with IntelliMix Room
To connect IntelliMix Room to videoconferencing software, select IntelliMix Room Echo Cancelling Speakerphone as the
speaker and the microphone in your videoconferencing software. Do the same thing in the computer's sound settings.
The microphone setting sends signals to the videoconferencing software from any microphone connected to IntelliMix Room.
Shure Incorporated
10/13