Application - gefran ADV200 Manual

26 – APPLICATION
This menu is designed to host two applications using the MDPlc program.
The PID application is installed by default in the APPLICATION / APPLICATION 1 menu. Follow below procedure to
activate PID application.
The APPLICATION / APPLICATION 2 menu is available for custom applications.
It will not be possible to use both applications simultaneously. The 558 Application select parameter in the DRIVE
CONFIG menu must be used to select between the two possible applications.
T+ T - EN LOC ILim n:0 AL
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
T+ T - EN LOC ILim n:0 AL
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
T+ T - EN LOC ILim n:0 AL
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
Switch the drive off and then switch it on again.
The PID menu will be available via keypad.
T+ T - EN LOC ILim n:0 AL
23 COMMUNICATION
24 ALARM CONFIG
25 ALARM LOG
26 PID
ADV200 • Functions description and parameters list
T+ T- EN LOC ILim n:0
X 2
0 4 . 0 3 PA R : 5 5 4
Access mode
Eas
Y
Value 0
T+ T- EN LOC ILim n:0
X 4
0 4 . 0 5 PA R : 5 5 8
Application select
None
Value 0
T+ T- EN LOC ILim n:0 AL
0 4 . 0 1 PA R : 5 5 0
Save arameters p
Press E to execute
AL T+ T- EN
0 4 . 0 3
E
Access mode
p
Ex ert
Value
AL T+ T- EN
0 4 . 0 5
E
Application select

Application 1

Value
T+ T- EN LOC ILim n:0
0 4 . 0 1 PA R : 5 5 0
E
Save arameters p
In ro ress p g
LOC ILim n:0 AL
PA R : 5 5 4
E
1
LOC ILim n:0 AL
PA R : 5 5 8
E
1
AL T+ T- EN LOC ILim n:0
0 4 . 0 1 PA R : 5 5 0
Save arameters p
Done
AL
187