gefran ADV200 Manual page 193

- 1690 An inp 2X err mon
This parameter contains the signal of possible disconnection of the related input from the optional board.
Menu PAR Description
2388 Torque ref nofilter
The torque control reference current without filter is displayed (in Flux vector OL and field-oriented vector mode).
Menu PAR Description
2396 Torque nofilter
Monitoring of the actual torque reference without filters.
Menu PAR Description
3006 Speed ratio out mon
This parameter displays the value of the speed ratio used by the "Speed draw" function (speed ratio).
Menu PAR Description
2392 Torque ref 1 mon
The total value of torque reference 1 is displayed.
Menu PAR Description
3180 Brake control mon
This parameter displays the status of the brake command.
0 Brake closed
1 Brake open
Menu PAR Description
3192 Brake open thr mon
Brake opening threshold value. Only if Hoist mode 2 has been selected.
Menu PAR Description
3214 Motor overload trip
This signal is active when the drive is in the motor overload alarm condition.
Menu PAR Description
3262 Bres overload trip
This signal is active when the drive is in the braking resistor overload alarm condition.
Menu PAR Description
3374 Vf catch out
The voltage applied during capture on-the-fly of the motor in Vf mode is displayed.
Menu PAR Description
3442 Powerloss rampdown
This parameter indicates the status of the Powerloss function deceleration ramp
0 Powerloss function deceleration ramp not ended
1 Powerloss function deceleration ramp ended
The signal is enabled at the end of the Powerloss function deceleration ramp.
The signal is disabled at different times depending on the Powerloss mode setting.
ADV200 • Functions description and parameters list
BIT 16
UM Type FB BIT
perc FLOAT 16
UM Type FB BIT
perc FLOAT 16
UM Type FB BIT
rpm INT16 16
UM Type FB BIT
perc FLOAT 16/32
UM Type FB BIT
rpm INT16 16
UM Type FB BIT
perc FLOAT
UM Type FB BIT
BIT 16
UM Type FB BIT
BIT 16
UM Type FB BIT
INT32 16
UM Type FB BIT
BIT 16
0 0
Def Min
0.0 0.0
Def Min
0.0 0.0
Def Min
0 0
Def Min
0.0 -300.0
Def Min
0 0
Def Min
0 0.0
Def Min
0 0
Def Min
0 0
Def Min
0 0
Def Min
0 0
0 ER
Max Acc Mod
0.0 ER
Max Acc Mod
0.0 ER
Max Acc Mod
0 ER
Max Acc Mod
300.0 ERW
Max Acc Mod
1 ER
Max Acc Mod
0 ERS
Max Acc Mod
1 ER
Max Acc Mod
1 ER
Max Acc Mod
0 ER
Max Acc Mod
1 ER
193