Option Board - HP EliteDesk 800 G5 SFF Maintenance And Service Manual

Option board

An option board can be installed near the back of the system board that provides an additional connector on
the rear I/O panel.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the two Phillips screws (1) that secure the board to the system board.
4. Lift to disengage the board from the system board connector, and then remove the option board from
the computer (2).
To reinstall the option board, reverse the removal procedure.
(Preparation for disassembly on page
(Access panel on page 19).
18).
Option board 53