Rotating The Eisa Fan; Installing An Option Board - HP Visualize c160 Owner's Manual

B_configure.doc 133 Tue Jul 2 15:27:17 1996
Figure 47
Figure 48
8 Make sure that the EISA fan is fully rotated, as shown in Figure 47.

Rotating the EISA Fan

9 Slide the option boards into the slots that they came out of, as shown in Figure
48. Make sure that the hole in each board's handle aligns with the pin on the back
panel.

Installing an Option Board

Changing Your Workstation's Hardware Configuration
Installing the EGRAM (Enhanced Graphics RAM) Module
133