Card reader
The card reader is secured to the front of the computer behind the bezel.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Disconnect the cable from the system board connector (1).
5.
Remove the screw that secures the card reader to the front of the computer (2), and then remove the
card reader from the computer (3).
To install the card reader, reverse the removal procedure.
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page
20).
19).
18).
Card reader
49