HP EliteDesk 800 G5 SFF Maintenance And Service Manual page 112

Table 6-2 Computer Setup—Security (continued)
Option
Utilities
102 Chapter 6 Computer Setup (F10) Utility
Description
NOTE: Notify user alerts the user with a POST error on the first boot after the sensor detects
removal of the cover. If the password is set, Administrator Password requires that the password be
entered to boot the computer if the sensor detects that the cover has been removed.
● Trusted Execution Technology (TXT)
Enabling this feature disables OS management of Embedded Security Device, prevents a reset of the
Embedded Security Device, and prevents the configuration of VTx, VTd, and Embedded Security
Device.
● Intel Software Guard Extensions (SGX)
SGX protects select code and data from disclosure or modification.
Hard Drive Utilities
● Save/Restore MBR of System Hard Drive
NOTE: Windows 10 systems are generally not formatted to include an MBR. Instead they use GUID
Partition Table (GPT) format, which better supports large hard drives.
Enabling this feature saves the Master Boot Record (MBR) of the system hard drive. If the MBR gets
changed, the user is prompted to restore the MBR. Default is Disabled.
The MBR contains information needed to successfully boot from a disk and to access the data stored
on the disk. Master Boot Record Security may prevent unintentional or malicious changes to the
MBR, such as those caused by some viruses or by the incorrect use of certain disk utilities. It also
allows you to recover the "last known good" MBR, should changes to the MBR be detected when the
system is restarted.
NOTE: Most operating systems control access to the MBR of the current bootable disk; the BIOS
cannot prevent changes that may occur while the operating system is running.
Restores the backup Master Boot Record to the current bootable disk. Default is Disabled.
Only appears if all of the following conditions are true:
– MBR security is enabled
A backup copy of the MBR has been previously saved
–
– The current bootable disk is the same disk from which the backup copy was saved
IMPORTANT: Restoring a previously saved MBR after a disk utility or operating system has
modified the MBR, may cause the data on the disk to become inaccessible. Only restore a previously
saved MBR if you are confident that the current bootable disk's MBR has been corrupted or infected
with a virus.
● Save/Restore GPT of System Hard Drive
Enabling this feature saves the GUID Partition Table (GPT) of the system hard drive. If the GPT is
subsequently changed, the user is prompted to choose whether to restore GPT.
● DriveLock
Allows you to assign or modify a master or user password for hard drives. When this feature is
enabled, the user is prompted to provide one of the DriveLock passwords during POST. If neither is
successfully entered, the hard drive remains inaccessible until one of the passwords is successfully
provided during a subsequent cold-boot sequence.
IMPORTANT: Be aware that these settings take place immediately. A save is not necessary.
IMPORTANT: Be sure to document the DriveLock password. Losing a DriveLock password renders a
drive permanently locked.
NOTE: This selection appears only when at least one drive that supports the DriveLock feature is
attached to the system.
After you select a drive, the following options are available: