Removing And Installing An M.2 Ssd Storage Card - HP EliteDesk 800 G5 SFF Maintenance And Service Manual

Removing and installing an M.2 SSD storage card

NOTE: There are two M.2 SSD sockets on the system board. The computer supports 2230 and 2280 M.2 SSD
cards.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Rotate the drive cage to its upright position
5. To remove an M.2 SSD card, remove the screw that secures the card (1), lift the end of the card up (2),
and then slide the card out of the system board connector (3).
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 20).
(Drive cage on page
19).
41).
18).
Drives 45