Gazer F225 User Manual page 18

ENG
Date/Time settings
CAR ID
Format
Default settings
LCD control
Motion detect
LCD OFF TIME
Split time
GPS POWER
18
Settings menu
Main settings
Date and time watermark settings.
Watermarking.
To navigate from symbol to symbol, use
Up/Down/MODE buttons.
Memory card formatting.
Reset to factory settings.
Screen brightness and contrast adjustment.
Enable/disable motion detector mode.
To activate this function, the MVR must be
in the recording mode.
Screen timeout delay settings.
Off/30sec/1min/3min
When the «Screen saver» function is
enabled, a screen saver will appear on
the screen after a specified period. It will
display the current time/date, speed,
recording status and other information.
Setting the length of recorded videos with
loop overwriting.
1min/2min/5min/10min
Enable/disable the recording location
data saving function (вincluding GPS
watermarks on video clips).