Table of Contents
Advertisement
CompactPowerMonitor CPM
20.2
Mounting position of a CompactPowerMonitor CPM with oval wheel meter
Please note during installation, that the axis of the oval wheel meter must always be horizontal.
Fig. 20.2:
Position of the oval wheel meter axis
Correct mounting position
The device can either stand on its
feet (A) or the connections and dis-
play are in an upright position (B)
Incorrect mounting position
The flat side of the oval wheel
meter must not point downwards
(to the table).
Tab. 20.3:
Mounting position of the CompactPowerMonitor CPM with oval wheel meter
For a continuous operation, the oval wheel meter axis has to be positioned horizontally. For a short
period of time (a few hours per year) the CPM with oval wheel meter can be operated in the "incor-
rect" installation position without immediately causing damages to the device. Longer operation
periods, however, may wear off the flow rate sensor.
Revision 02/2019 EN
Oval wheel meter axis
A
B
57
Advertisement
Table of Contents
