CompactPowerMonitor CPM
8.6
Connect hoses
The flow direction (Water In/Water Out) indicated on the device has to be strictly observed. The plug connec-
tors are intended for hoses with an outer diameter of 12 mm.
The plug connectors are sealed with sealing plugs in order to ensure that no residual water can escape.
Please remove the the sealing plugs and keep for future transportations or shipping.
Remove the sealing plugs of the water connections
Release ring
Fig. 8.1:
Remove the sealing plugs of the water connections
Revision 02/2019 EN
1.
Please push down the release ring of the connection and pull
out the plug with your free hand.
2.
Remove the sealing plugs of the water connections and keep
it in a save place.
1. Push
3.
Close the flow line (Water In) and the return flow (Water Out)
of the device, by inserting the hose as far as possible (approx.
20 mm deep).
2. Pull
23