Table of Contents
Advertisement
CompactPowerMonitor CPM
5.5
Short overview installation
1.
Installing the LaserDiagnosticsSoftware LDS on the PC (option)
•
Please contact PRIMES or your PRIMES distribution partner to order the
software
2.
Taking safety precautions
3.
Installing the device
•
Follow the safety instructions
•
Set the installation position
•
Mount the device stably
4.
Connect the water-cooling
•
Determine flow rate according Tab. 8.5 on page 22
•
Connect hoses (hose outer diameter of 12 mm)
5.
Power supply
•
Connect power supply
•
Connect safety interlock
6.
Connection with the PC
•
Via USB (scope of delivery)
•
Via RS232/RS485 converter (optional)
7.
Parallel operation of CompactPowerMonitor PMC and,
•
For example, the FocusMonitor
8.
Perform the measurement
•
Follow the safety instructions
•
Perform the measurement with the optional LaserDiagnosticsSoftware LDS
9.
Installing the PowerMonitorSoftware PMS on the PC
•
Software is part of the scope of delivery
10. Perform the measurement
•
Follow the safety instructions
•
Perform the measurement with the PowerMonitorSoftware PMS
Revision 02/2019 EN
See separate Operating Manual
of the LaserDiagnosticsSoftware
LDS
Chapter 1 on page 7
Chapter 7 on page 15
Chapter 8 on page 20
Chapter 9.1 on page 24
Chapter 9.3 on page 25
Chapter 9.4 on page 26
Chapter 9.5 on page 28
Chapter 9.6 on page 30
Chapter 11 on page 34
Chapter 12 on page 38
Chapter 13 on page 41
13
Advertisement
Table of Contents
