Table of Contents
Advertisement
CompactPowerMonitor CPM
11.3.4
Starting a power measurement
1.
Follow the safety instructions in chap-
ter 11.1 on page 34.
2.
Turn on the laser.
3.
Click on the Start button.
The progress of the measurement is
displayed.
When a measuring period is entered in the
Device control > Measurement dura-
tion in min. entry window, the measure-
ment is terminated automatically.
4.
Click on the Stop button.
•
The measurement is completed.
5.
Turn off the laser.
11.3.5
Measurement results display
The measurement results are shown in the opened tool Power Measurement after the measurement is com-
pleted (see below).
A detailed description of the tools and the assessment of the measuring results can be found in the separate
operating manual for the LaserDiagnosticsSoftware LDS.
Revision 02/2019 EN
37
Advertisement
Table of Contents
