Table of Contents
Advertisement
18
Technical data
18.1
CPM C-9
Measurement parameters
Max. power range
Irradiation time
Wavelength range
Inlet aperture
Max. power density at beam diameter
Average power density at beam diameter
Accuracy
Reproducibility
Time constant
A central beam incidence is assumed.
1)
Supply data
Power supply, DC
Min. cooling water pressure
Max. cooling water pressure
Recommended cooling water flow rate
Cooling water flow rate (warning level)
Cooling water temperature T
Please contact PRIMES in advance in case you intend not to work within this specification.
2)
Communication
Interfaces
Dimensions and Weights
Dimensions (L x W x H)
Weight (approx.)
Environmental conditions
Operating temperature range
Storage temperature range
Reference temperature
Permissible relative humidity (non condensing)
48
1)
1)
2)
in
CompactPowerMonitor CPM
0.5 – 9 kW
continuous
800 – 1 100 nm and 10 600 nm
55 mm
10 kW/cm² (Ø < 10 mm)
5 kW/cm² (Ø 10 – 30 mm)
0,5 kW/cm² (Ø 30 – 55 mm)
5 kW/cm² (Ø < 10 mm)
5 kW/cm² (Ø 10 – 30 mm)
0.5 kW/cm² (Ø 30 – 55 mm)
± 3 %
± 1.5 %
< 10 s
24 V ± 5 %, max. 0.5 A
2 bar
4 bar
8 – 11 l/min
4 l/min
Dew point temperatur < T
in
RS485/USB
180 × 162 × 136 mm
5.1 kg
15 – 40 °C
5 – 50 °C
22 °C
10 – 80 %
< 30 °C
Revision 02/2019 EN
Advertisement
Table of Contents
