Table of Contents
Advertisement
CompactPowerMonitor CPM
20
Appendix
20.1
Operation of the CompactPowerMonitor with PanelDisplay (without PC)
By option there is a external control display (PanelDisplay, Order-No. 130-005-003) available for the opera-
tion of the system. The display is operated via the standard PRIMES bus and therefore enables the reading
from a greater distance from the measuring position without a PC.
1. Please connect the display and the CPM by the 9-pole D-Sub cable for the PRIMES RS485 bus (on the
front or on the rear side).
2. Connect the power supply unit via the adapter to the 9 pin D-Sub socket (RS485) of the PanelDisplay.
CPM
PanelDisplay
Fig. 20.1:
Connecting the CompactPower Monitor CPM to the Panel Display
Revision 02/2019 EN
PRIMES connection cable
plug/plug
L
=20 m
max
Adapter
PRIMES power supply
55
Advertisement
Table of Contents
