Lock Page Of Mpt - Texas Instruments 2000 Series Reference Manual

PC to Micro-reader

5.1.5 Lock Page of MPT

The following sequence of bytes locks page 2 of an MPT.
Content
Byte
(hex)
0 01
1 05
2 6C
3 32
4 07
5 01
6 0A
7 5F
5.1.6 Selective Read Page of SAMPT
The following sequence of bytes reads page 2 of an SAMPT.
The 24 bit selective address =
12 34 56
MSByte LSByte
Content
Byte
(hex)
0 01
1 07
2 4C
3 32
4 04
5 0B
6 56
7 34
8 12
9 06
36 Communication Protocol Examples
Comment
Start Mark
Length Five bytes follow excluding BCC
Command Field (1) Perform Single command, calculate FBCC, send Power Burst I & II with data
Data Field (1) Power Burst I with 50 ms duration (charge-up)
Data Field (2) Power Burst II with 15 ms duration (Progr. burst)
Data Field (3) One Data Field follows
Data Field (4) Write Address specifying Lock Page 2
BCC BCC over previous bytes excluding Start Mark
Comment
Start Mark
Length 7 bytes follow excluding BCC
Command Field (1) Perform Single command, calculate FBCC, send Power Burst I with Data
Data Field (1) Power Burst I with 50 ms duration (charge-up)
Data Field (2) 4 Data Fields follow
Data Field (3) Write Address specifying selective Read Page 2
Data Field (4) Selective Address LSB
Data Field (5) Selective Address
Data Field (6) Selective Address MSB
BCC BCC over previous bytes excluding Start Mark
www.ti.com
Description
Description
SCBU027 – May 2000
Submit Documentation Feedback