ZiLOG ZMOTION Series Getting Started page 10

Windows 2000
Follow the steps below to install the USB Smart Cable for Windows 2000:
1. Connect the Zilog USB device to the Host PC. The Found New Hardware Wizard should
activate automatically after connecting the Zilog USB device for the first time.
2. Click [Next] in the Found New Hardware Wizard after it has been activated.
3. Select [Search for a suitable driver for my device (Recommended)] and click [Next].
4. Select [Specify a location] and click [Next].
5. Browse to the following driver directory and click [OK].
<ZDS installation>\device drivers\USB\
6. Click [Next] after the appropriate driver is found.
7. Click [Finish] to complete the installation.
Windows 98SE
Follow the steps below to install the USB Smart Cable for Windows 98SE:
1. Connect the Zilog USB device to the Host PC. The Add New Hardware Wizard should activate
automatically after connecting the Zilog USB device for the first time.
2. Click [Next] in the Add New Hardware Wizard after it has been activated.
3. Select [Search for the best driver for your device (Recommended)] and click [Next].
4. Select [Specify a location] and browse to the following driver directory, and click [Next].
<ZDS installation>\device drivers\USB\
5. Click [Next] after the appropriate driver is found.
6. Click [Finish] to complete the installation.
UM022801-0610
Getting Started with Zilog's ZMOTION TM Development Kit
10 of 18