Scanning To A Memory Device - Epson WorkForce Enterprise WF-M20590 Series User Manual

User's Guide
3. Select Document Capture Pro.
4. Select Select Computer., and then select the computer on which you created the job in Document Capture
Pro.
Note:
❏ The printer's control panel displays up to 100 computers on which Document Capture Pro is installed.
❏ If you have selected Option > Network Scanning Settings, and enabled Protect with password in Document
Capture Pro or Document Capture, enter a password.
❏ If Server Mode is set as the operation mode, you do not need to perform this step.
5. Select Select Job., and then select the job.
Note:
❏ If you have selected Protect with password in the settings in Document Capture Pro Server, enter a password.
❏ If you have set only one job, you do not need to select the job. Proceed to the next step.
6. Select the area in which the job content is displayed, and then check the job details.
x
7. Tap .
Related Information
"Placing Originals" on page 32
&

Scanning to a Memory Device

You can save the scanned image to a memory device.
1. Insert a memory device into the printer's external interface USB port.
2. Place the originals.
Note:
If you want to scan multiple originals or make 2-sided scans, place all of the originals in the ADF.
3. Tap Scan on the home screen.
4. Tap Memory Device.
5. Set items such as the save format.
6. Check other settings, and change them if necessary.
Note:
❏ Tap
to save your settings as a preset.
❏ Tap
to restore settings to their defaults.
x
7. Tap .
Related Information
"Part Names and Functions" on page 13
&
Scanning
69