Maintenance Box Code; Replacing The Maintenance Box - Epson WorkForce Enterprise WF-M20590 Series User Manual

User's Guide
❏ Do not touch the sections shown in the illustration. Doing so may prevent normal operation and you may get
smeared with ink.
❏ Do not tilt the used maintenance box until after it is sealed in the plastic bag; otherwise ink may leak.
❏ Keep the maintenance box out of direct sunlight.
❏ Do not store the maintenance box in high or freezing temperatures.
❏ Do not reuse a maintenance box which has been removed and left detached for a long period. Ink inside the box
will have solidified and no more ink can be absorbed.
❏ Do not remove the maintenance box and its cover except when replacing the maintenance box; otherwise ink
may leak.

Maintenance Box Code

Epson recommends the use of a genuine Epson maintenance box.
The following is the code for the genuine Epson maintenance box.
CT13T6713

Replacing the Maintenance Box

In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink
leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the
maintenance box has reached its limit. Whether and how often this is required will vary according to the number
of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs.
When a message is displayed prompting you to replace the maintenance box, refer to the animations displayed on
the control panel. The need for replacement of the box does not mean that your printer has ceased to operate in
accordance with its specifications. The Epson warranty does not cover the cost of this replacement. It is a user-
serviceable part.
Note:
When it is full, you cannot print until the maintenance box is replaced to avoid ink leakage.
Related Information
"Maintenance Box Code" on page 133
&
"Maintenance Box Handling Precautions" on page 132
&
Consumables
133