Sound Control - EuroLite DMX Scan Control 192 MK2 User Manual

Sound Control

In sound-control mode, the scenes stored in a memory bank will be synchronized with music pulses at the
jack AUDIO or, if the jack is not connected, via the internal microphone.
2. Use BANK UP/DOWN to select a bank with scenes for the run.
3. Use the controls WAIT TIME and FADE TIME to adjust the scenes as
desired.
Note: Repeatedly press TAP/DISPLAY for a more precise input of the
running speed. The interval of the last two respective keystrokes defines the
speed. When using this function, all settings made with the WAIT TIME
fader are being ignored, as long as you do not move it.
4. Press AUTO/DEL again to exit the mode.
1. Call the sound-control mode with the button MUSIC/BANK COPY so that
the LED MUSIC lights.
2. Use the buttons BANK UP and BANK DOWN to select the desired memory
bank (1-30). The scenes stored in the memory bank will be called one after
the other in sync with the sound.
3. The sensitivity of the sound control is adjustable. For this, keep the button
MUSIC/BANK COPY pressed and simultaneously use the BANK UP and
BANK DOWN to adjust the value.
4. Use the control FADE TIME to adjust the fade time, i.e. the time between
the steps.
5. Press MUSIC/BANK COPY to exit the mode.
48/56 00116794, Version 1.0