Inserting A Scene Into A Chase - EuroLite DMX Scan Control 192 MK2 User Manual

Inserting a Scene into a Chase

It is possible to insert scenes after the current editing position.
3. Use the buttons BANK UP and BANK DOWN to select the memory bank to
be inserted.
4. Press MUSIC/BANK COPY.
5. Press the button MIDI/REC to memorize the revised chase. To confirm the
memory procedure, all LEDs of the controller flash three times.
1. Enable programming mode.
2. Select the chase, you want to add a step to.
3. Press TAP/DISPLAY, the display shows the current step.
4. Use BANK UP/DOWN to select the step after which you want to add a step.
5. Press MIDI/REC, then the display shows the number of steps increased by
one. If you, e.g., want to insert a step between steps 3 and 4, and you scroll
to step 3, the display shows 'STEP 004' when you press the button
MIDI/REC.
6. Press TAP/DISPLAY again, then the display shows the current scene and
bank.
45/56 00116794, Version 1.0