Deleting A Scene; Deleting All Illumination Scenes; Copying A Memory Bank - EuroLite DMX Scan Control 192 MK2 User Manual

Deleting a Scene

Deleting All Illumination Scenes

This function clears all stored scenes and sets the DMX channels to '0'.

Copying a Memory Bank

1. Use the buttons SCENES to select the scene you want to delete.
2. Keep AUTO/DEL pressed. Now additionally press the SCENES button of the
scene you want to delete. To confirm the deleting procedure, all LEDs of the
controller flash three times.
While the device is switched off, simultaneously press BANK DOWN and
PROGRAM. While pressing the buttons, turn on the device. All scenes should
now be deleted.
1. Enable programming mode.
2. Use BANK UP/DOWN to select the bank to be copied.
3. Press MIDI/REC.
4. Use BANK UP/DOWN to select the bank to be copied to.
5. Press MUSIC/BANK COPY. All LEDs will flash three times and thus confirm
the copying of the bank.
6. Press PROGRAM for three seconds to quit programming mode.
43/56 00116794, Version 1.0