Deleting a Scene from a Chase
Deleting a Chase
7. Create the desired scene and record it as a new step. Or select a
programmed scene which you want to add to this chase.
8. Press MIDI/REC again, then all LEDs will flash three times briefly indicating
that the new step has been inserted into this chase.
1. Enable programming mode.
2. Select the chase containing the step to be deleted.
3. Press TAP/DISPLAY, the display shows the current step.
4. Use BANK UP/DOWN to select the step you want to delete.
5. Press AUTO/DEL to delete the step. All LEDs will flash three times briefly,
thus indicating that the step has been deleted.
1. Enable programming mode.
2. Select the chase you want to delete.
46/56
00116794, Version 1.0