Editing Scenes - EuroLite DMX Scan Control 192 MK2 User Manual

Example: Program scanner 1 with eight scenes in which channels 1 - 8 are successively set to 100 %. Save
the scenes in bank 3.
1. Enable programming mode.
2. Press SCANNERS 1 to turn on its fader control.
3. Press PAGE SELECT to select page A.
4. Slide fader 1 all the way up.
5. Press MIDI/REC.
6. Select bank 3 using the BANK UP/DOWN buttons.
7. Press SCENES 1.
8. Repeat steps 4 - 7 until all eight scenes are stored in bank 3.
9. Press SCANNERS 1 again to disable the scanner again.
10. Press PROGRAM for three seconds to quit programming mode.

Editing Scenes

9. Once the programming is completed, press PROGRAM for three seconds. The
LED PROGRAM goes out and indicates that you have quit the programming
mode.
1. Enable programming mode.
2. Use BANK UP/DOWN to select the bank with the scene you want to edit.
3. Use the SCENES buttons to select the desired scene.
4. Make the desired changes using the faders and/or joystick.
5. Press MIDI/REC to save the changes.
41/56 00116794, Version 1.0