Table of Contents
Advertisement
E
E
NERGY
FFICIENCY
S
PECIFICATIONS
© 2012, IMI Cornelius Inc.
The cooling liquid in a beverage system takes a significant amount of energy to
maintain, usually using electrical power for this purpose. To keep the need for
energy as low as possible and save costs, the Energize unit decides between dis-
pense times and operational readiness. During operational readiness, for example
overnight, Energize runs in standby mode. All functions are reduced to a minimum
and therefore power consumption is also at a minimum. The Energize system
identifies when drinks are dispensed, automatically switching to maximum power
to supply the required amount of ice. After dispensing, Energize switches back to
standby mode automatically.
Model
Continuous Dispense Rate at 75 °F (24 °C)
ambient
Peak Dispense Rate for 2 hours at 75 °F
(24 °C) ambient
Maximum Ambient Condition
Ice bank Weight
Compressor size
Refrigerant
Refrigerant charge
Tank fill volume (Water Bath)
Compressor run time
Carbonator size
Pressure switch water inlet
Pressure switch carbonator pump outlet
Voltage
Height
Depth
Width
Shipping Weight
- 5 -
Energize6 Service Manual
Table 1.
Energize6 USA 220V 60Hz
7 x 12 oz. (355 ml)
10 x 12 oz. (355 ml)
104 °F (40 °C) Unit / 120 °F (49 °C)
Remote Condenser
110 lbs. (50 kg)
2 HP 2.65 cu in. (43.5 cc)
R404a
14.5 lbs. (6.6 kg)
39 gal. (148 liters)
Start delay 3 min, min run 5 min.
Dual carb with 2 x 3 liter tanks
on >10 psig (0.689 bar) / off <5 psig
(0.345 bar)
ON >145 psig (10 bar) / OFF <130.5 psig
(9 bar)
220V 60Hz 3 phase
31.8 in. (810mm)
27.2 in. (690mm)
42.5 in. (1080mm)
approx 441 lbs. (200kg)
Publication Number: 621058457SER
Advertisement
Table of Contents
