Exceptional Functions/Situations (Error Messages); Shutdown After Use; Storage And Protecting Between Usages - Noraxon Ultium EMG Analog Input SmartLead User Manual

Analog Input SmartLead

8.3 Exceptional Functions/Situations (error messages)

Please see the appropriate Ultium hardware manual (P-880) for possible error messages.

8.4 Shutdown after Use

At the end of the day:
•
Place all EMG sensors inside the sensor docking station(s).
•
Tap the Sensor Power touch button on the Receiver to power all sensors off.

8.5 Storage and Protecting Between Usages

For extended storage or when travelling:
•
Place all sensors into the sensor docking station and power them off (Slide your finger
across the sensor power touch button. When the sensors are shutdown they will stop
blinking completely. The sensors are reactivated by briefly charging them).
•
Position all components inside the system travelling case according to their prepared
cavities. (see photo below)
P-811 Rev B (May 2019)
21