Table of Contents
Advertisement
Analog Input SmartLead
•
Resolution: 0.61mV
•
Accuracy: +/- 2% full scale
•
Noise: < 2 mV
•
Analog Output scale factor: 250 mV/V
•
Input Impedance: 2.1 Mohm
Physical Specifications
•
SmartLead Dimensions:
1.905 cm Width x 1.12 cm Thickness, Length varies slightly
o
15.3 Environmental Conditions for Storage and Transport
•
Ambient Temperature: 0C to 38C
•
Relative Humidity: 10% to 100%
•
Atmospheric Pressure: 70kPa to 107kPa
15.4 Ultium Analog Input SmartLead Operation
The Ultium Analog Input SmartLead allows a device with up to 3 analog signals to be used with the
Ultium system. This sensor gives users freedom to select the appropriate device for their research.
The device must be self-powered because the sensor does not provide power to the device
attached to it.
The input range of the SmartLead was initially +/-5V. However, Noraxon has increased this to +/-
20V in later revisions. Be sure to check the label on the connector of the SmartLead before
measuring signals larger than +/-5V.
P-811 Rev B (May 2019)
27
Advertisement
Table of Contents
