Getting Started; Quick Start Guides; Preparing The Product For Use; Component Inputs, Outputs, And Indicators - Noraxon Ultium EMG Analog Input SmartLead User Manual

Analog Input SmartLead

5 Getting Started

5.1 Quick Start Guides

Please see the hardware manual for the appropriate EMG system.
P-880: Ultium hardware user manual

6 Preparing the Product for Use

6.1 Unpacking and Component Identification
Ultium Analog Input User Manual (part #811A) This document

6.2 Component Inputs, Outputs, and Indicators

1 Ultium Sensor (front and top edge)
2 EMG Sensor (back and bottom edge)
P-811 Rev B (May 2019)
Ultium FootSwitch SmartLead with 2.5mm
TRRS Mating Connector (Part #802)
Ultium FootSwitch SmartLead with Exposed
Input Wires (Part #802)
Additional contents not illustrated
OR
SmartLead Connector – Connector
for SmartLeads to change function
of the Ultium sensor.
Status LED – Sensor operational
indicator flashes green when
measuring. Solid Yellow when
charging.
Power Button – Power the sensor
On/Off. Hold for 3+ seconds for a
hard reset.
8