F9 -A/D Count; F10 -Rounding Off The Total Price - Adam Equipment WBZ Series Service Manual

8.2.9 F9 -A/D COUNT

To enter this parameter, press the [Tare] key when "
This parameter allows you to view the A/D counts from the internal A/D converter. This can
be an aid to service.
Press the [0] key to advance to the next parameter.
F10 –ROUNDING OFF THE TOTAL PRICE
8.2.10
This parameter allows you to set the value to 1 or 5 for rounding off the least significant
digit of the Total Price. For example, if the value is set to 1, the Total Price will remain as
12.47 for the original value of 12.47 and if it is set to 5, the Total Price will be rounded off
to 12.45 instead of 12.47.
To enter this parameter, press the [Tare] key when "
The display will show the current settings.
Press the [0] key to change the value.
Press [Tare] to accept the displayed value and return to the parameter.
Press the [0] key to advance to the next parameter.
© Adam Equipment Company 2008
F9
" is shown.
F10
" is shown.
18