F7 -Re-Zero Range; F8 -Successive Tare - Adam Equipment WBZ Series Service Manual

8.2.7 F7 -RE-ZERO RANGE

To enter this parameter, press the [Tare] key when "
The display will show the current re-zero range.
Press the [0] key to change the value.
Press [Tare] to accept the displayed value and return to the parameter.
Press the [0] key to advance to the next parameter.
NOTE: Only 2% is allowed for the WBZ scales.

8.2.8 F8 -SUCCESSIVE TARE

To enter this parameter, press the [Tare] key when "
The display will show if the successive tare is on or off.
Press the [0] key to change the value.
Press [Tare] to accept the displayed value and return to the parameter.
Press the [0] key to advance to the next parameter.
NOTE: Either option is allowed for the WBZ scales, use On for default.
© Adam Equipment Company 2008
F7
" is shown.
F8
" is shown.
17