Technical Data - ESAB GMH Instruction Manual

GB
2.3

Technical data

Supply voltage
Current output
Ambient temperature
Relative atmospheric humidity
Max. motor current
Enclosure class
Current limits
Power supply fusing
Motor regulator, type
Rotor voltage
Field voltage, separate magnetised motor
Weights:
Joint--tracking unit:
Portable control box:
Sensor and slide cross with bracket:
Guide finger:
Working range sensor, radially 360
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP 23 is designed for indoor and outdoor use.
Working range and setting speed, see the figure below and the technical description
in the operating instructions for A6 Slide.
Angle deviation deg
Normal ratio
Diagram of the weld joint's maximum angle deviation in relation to the set welding
speed.
hga1d1ea
GMH
42V AC, 50--60 Hz
450 V A
--15 C -- + 45 C
Max. 98%
6A 100%
IP 23
15 A (hardware current limit)
10 A slow
Switched four quadrant reg.
40 V DC
60 V DC
6,2 kg
2,7 kg (complete with 4m cable and protection)
2.2 kg
0.6 kg
4 mm
Inverted ratio
Welding speed cm/min
- - 88 - -