Maintenance; General; Wear Parts; Ordering Of Spare Parts - ESAB GMH Instruction Manual

GB
5

MAINTENANCE

5.1

General

Note:
All warranty undertakings given by the supplier cease to apply if the customer
attempts to rectify any faults on the machine during the warranty period.
Check daily that the guide fingers are not worn or damaged.
S
Clean the sensor with compressed air regularly.
S
Follow the instructions for the internal components.
S
Please refer to ESAB's service department for tuning the system.
S
5.2

Wear parts

Tracking fingers
Part no. 146 586--001
6

ORDERING OF SPARE PARTS

Spare parts are ordered through your nearest ESAB representative, see back cover.
When ordering spare parts, please state machine type and number as well as desig-
nation and spare part number as shown in the spare parts list on page 251.
This will simplify dispatch and ensure you get the right part.
hga1m1ea
- - 102 - -