GB
3
INSTALLATION
3.1
General
The installation must be executed by a professional.
3.2
Installation and connection
1. Measurement information, see the dimension drawings on pages 247--249.
2. Connection, see the diagrams on pages 244--246
3. Check that the required output and voltage is available for complete installation.
4. Fit the guide finger parallel with the motor driven slide cross.
3.3
Tuning the sensor finger
Please refer to ESAB's service department for tuning the sensor finger.
3.4
Tuning the inductive sensor
Please refer to ESAB's service department for tuning the inductive sensor.
hga1i1ea
- - 91 - -