HomeMatic HM-LC-BI1PBU-FM Installation And Operating Manual page 62

If other devices are also in teach-in mode, they
will be taught-in.
If no teach-in operations are carried out, teach-in
mode will be exited automatically after 20 seconds. If
other devices are also in teach-in mode, they will be
taught-in.
8.2.1 Teaching in to a Homematic CCU
Your device can be conveniently
• controlled and configured,
• connected directly to other devices or
• used in central control programs
via the Homematic software „WebUI". Therefore, your
actuator has to be taught-in to the Homematic Central
Control Unit first. New devices are taught-in to the
Central Control Unit via the Homematic „WebUI".
A soon as a component has been taught-in to a
Central Control Unit, it can only be connected to
other components via the CCU.
Each component can only be taught-in to one
Central Control Unit.
62