HomeMatic HM-LC-BI1PBU-FM Installation And Operating Manual page 45

The actuator controls connected motors in accordance
with the wireless commands it receives or by operating
the rocker. Commands are transmitted by pressing
battery-operated buttons or remote controls, or via a
software interface. It is also possible to control actu-
ators via taught-in sensors. When an event occurs,
the sensors transmit a command (in the same way as
a button). Refer to the manual for the corresponding
sensor for more detailed information.
You can also operate the Homematic flush-mounted
shutter actuator manually using the rocker at any
time. Pressing the relevant button briefly moves the
connected motor to the corresponding limit position.
Briefly pressing the button for the opposite direction
stops the motor. Pressing the relevant button and
holding it down moves the motor in the corresponding
direction until the button is released or the limit positi-
on is reached.
The adapters for different switches allow you to
replace switches made by popular manufacturers with
an intelligent Homematic installation cost-effectively
during renovation, or integrate Homematic actuators
in the design of a new installation. Using existing or
planned switches and cabling reduces the cost of
45