Setting Up The Pds-220Fx Module - ICP DAS USA PDS-220F Series User Manual

4. Setting up the PDS-220Fx module

Step 1. Connect the PDS-220Fx module to the fiber optic network
Before connecting the PDS-220Fx module to a fiber optic network, the following
items are needed:
1. Power Supply：12 ~ 48 V
http://www.icpdas.com/products/Accessories/power_supply/power_list.htm
2. Fiber to Ethernet Converter (e.g. NS-200AFT
http://www.icpdas.com/products/Switch/industrial/industrial_list.htm
3. Check that the network settings on the PC are correctly configured and the Ethernet
connection is functioning normally.
4. Disable or correctly configure the Windows firewall and any Anti-Virus software
firewall first or else the "Search Servers" function in the VxComm Utility may not work
correctly. (Contact your System Administrator for more details if you are unsure how to do
this.)
5. Connect the PDS-220Fx module to the fiber optic network as shown on the following
page and switch on the power.
6. Make sure the LED indicator on the PDS-220Fx is flashing.
7. Install the VxComm Utility on your PC
The software is located at：
CD: \Napdos\7188e\tcp\vxcomm\driver(pc)\
http://ftp.icpdas.com/pub/cd/8000cd/napdos/7188e/tcp/vxcomm/driver(pc)/
(e.g. DP-665:
DC
PDS-220 Series User Manual (V1.0, Jun.2010) ----- 19
)
)