ICP DAS USA PM-3033 Series Quick Start Manual

1.
Shipping Package
This shipping package contains the following items
1 x PM-3033 module
2.
series
PM-3033
ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-3033 series that
gives you access to real-time electric usage for three-phase power measurement. With its high accuracy
(<0.5%, PF=1 ), the PM-3033 series can be applied to both low voltage primary side and/or medium/high
voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings
from the monitored equipments in real time under operation.
Direct input from "secondary side 1A/5A" type CTs. Dedicated CTs are no longer needed, which lowers the
cost of implementation.
It operates over a wide input voltages range 10 ~ 500 VAC which allows worldwide compatibility. It also
supports Modbus RTU, Modbus TCP or CANopen protocols for easy integration.
2.1. Caution & Warning
electricians and metering specialist. ICP DAS assumes no responsibility if your electrical installer does not follow
the appropriate national and local electrical codes.
ICP DAS assumes no liability for any damage resulting from the use of this product. ICP DAS reserves the right to
change this manual at any time without notice. The information furnished by ICP DAS is believed to be accurate
and reliable. However, no responsibility is assumed by ICP DAS for its use, not for any infringements of patents or
other rights of third parties resulting from its use.
2.2. Product Warranty & Customer Support
ICP DAS warrants all products free from defects in material and workmanship for a period of one year from the
date of shipping. During the warranty period, we will, at our position, either repair or replace any product that
proves to be defective. To report any defect, please contact ：+886-3- 597-3366 or service@icpdas.com.
2.2.1. Limitation of Warranty
This warranty does not apply to defects resulting from unauthorized modification, misuse, or use for reason other
than electrical power monitoring. The supplied meter is not a user-serviceable product.
ICP DAS Co., LTD
PM-3033 series Quick Start
1 x Quick Start
(This Document)
introduction
The meter contains hazardous voltages, and should never be disassembled. Failing to follow
this practice will result in serious injury or death. Any work on or near energized meters,
meter sockets, or other metering equipment could induce a danger of electrical shock. It is
strongly recommended that all work should be performed only by qualified industrial
PM-3033 series Quick Start V1.10
Screw Driver x 1 CD x 1
Page 1