Switching Between Init/Normal Modes - ICP DAS USA PDS-220F Series User Manual

6.2. Switching between Init/Normal Modes

PDS-220Fx
Comparison Table (Init/Run Modes)
Mode Firmware
Init
Init Mode is used to upgrade firmware and accepts MiniOS7 commands
(from PDS.COM1) only.
Running
Run
Run Mode is used for Virtual COM applications, and accepts Virtual COM
commands (TCP port 10000) and Telnet commands (TCP port 23).
Running
Console Mode is used to configure the Virtual COM.
Console
PDS.COM1 is the console port that accepts console commands while other
ports are still working with Virtual COM applications.
VCOM
Commands
Stop No
Yes
Yes
PDS-220 Series User Manual (V1.0, Jun.2010) ----- 40
Telnet
Commands
No
Yes
Yes
Console
Commands
No
No
Yes