REMOVAL
To remove complete cover and yoke
assembly:
1. OPEN cover and push assembly to the
rear. CLOSE cover so it rests on the
counter top.
2. Remove front panel (11). Remove bolt
(12) from bottom of slide rod, remove
bolt from back of slide rod (1600) and
remove rod (13). Complete assembly
can now be removed from the unit.
5-4
broaster.com Manual #17270 10/13 Rev 12/14
DISASSEMBLY
If warning sign (8)
becomes worn or illegi-
ble, it must be replaced immediately.
1. Rotate cover handle (2) to a centered
position.
2. Loosen screws (9) attaching splash
guard (10) to back panel assembly
(11).
3. Slide splash guard (10) forward and up
towards the end of the cover handle
(2).
Continued: