Introduction - palintest Micro 600 COND Manual

1

Introduction

1.0 Introduction
Thank you for purchasing the Micro 600 COND or Micro 600 TDS meter. These
microprocessor-based handheld meters are economical and easy to use with
a large custom LCD (Liquid Crystal Display) for clear and easy reading.
The Micro 600 COND measures conductivity (µS/cm or mS/cm) and temperature
(°C) while the Micro 600 TDS measures total dissolved solids (TDS) in
parts per million (ppm) or parts per thousand (ppt) and temperature (°C).
Each measures up to 5 different ranges and can automatically switch to
appropriate measuring range.
Your meter includes an electrode (cell constant K = 1.0) with built-in
temperature sensor, rubber armour, 4 alkaline "AAA" batteries, instruction
manual and warranty card.
The Micro 600 COND includes low (74µS), mid (1413µS) and high (12.88mS)
range conductivity solutions and deionised water.
The Micro 600 TDS includes 50ppm, 300ppm and 3000ppm conductivity
solutions and deionised water.
Please read this manual thoroughly before operating your meter.
To order other accessories and standards solutions, please refer to the
accessories section for more information.
4