Hold Function - palintest Micro 600 COND Manual

4.5 HOLD Function

For prolonged observation of a reading,
press HOLD while in measurement
mode to freeze the display.
1 To hold a measurement, press HOLD
while in measurement mode. [HO]
will appear on the display.
2 To release the held value, press the
HOLD again. [HO] will disappear
and measure is resumed.
NOTE: The meter will shut off automatically after 20 minutes of the last key
press. If the meter is shut off either automatically or manually, the HOLD
value will be lost.
Measurement
4
17