Adding/Editing An Entry In The Address List Or Call Book - Codan NGT AR Getting Started Manual

Using Quick Start
Adding/Editing an entry in the Address List
or Call Book
70
To add or edit an address that you call frequently:
1
Open Quick Start.
1
Scroll to Address/CallBk, then press
1
Enter the name of the station or person that you want to
add to the list, or use
then press
NOTE
1
Scroll to the type of call that you want to make, enter the
station address that you want to call, then press
1
If you selected Message? or No call type, enter the
message, then press
If you do not want to select a message, press
1
Scroll to the call system that you want to use to make the
call, then press
1
If you selected Phone? or No call type, select
<blank> for the phone link that you want to use, then
press .
When all the changes have been made to the call address,
the transceiver returns to Quick Start.
1
If you want to add more call addresses to your Address
List or Call Book, scroll to Address/CallBk and repeat
this process.
1
Close Quick Start, if required.
or to select an existing entry,
.
For help with entering text see
Entering and editing
.
.
NGT Transceiver Getting Started Guide
.
page 61,
text.
.
.