Using A Pin For Private Communications Within An Organisation - Codan NGT AR Getting Started Manual

Using a PIN for private communications
within an organisation
NGT Transceiver Getting Started Guide
To use the CES-128 voice encryptor with a PIN:
1
Start a call (see
1
Hold SEC to enter a PIN for the session.
1
Enter the 4-digit PIN that you have agreed to use with
others for this session, then press
CAUTION
The transceiver responds with two high short beeps, and
displays Go Secure with the secure mode and
Corporate secure index used, and PIN to indicate that a
PIN is in use. For example:
If you are in the Channel List, the active CES-128 voice
encryptor is indicated by the text Secure
highlighted at the bottom left of the channel screen. For
example:
CES-128 voice encryptor option
page 14, Making a selective
The PIN must be a number that both parties
know and agree upon without mentioning
it over the air.
call).
.
< >
index P
25