Setting Up A Scan List - Codan NGT AR Getting Started Manual

Setting up a scan list

NGT Transceiver Getting Started Guide
1
Close Quick Start, if required.
NOTE
To set up a scan list:
1
Open Quick Start.
1
Scroll to Set scan list, then press
The first channel in the transceiver is displayed.
1
If you want to add this channel to the scan list, press
If you do not want to add this channel to the scan list,
press .
When all the channels have been viewed or you have
added 15 channels to your scan list, the transceiver
returns to Quick Start.
If you do not want to scroll through all the channels in
your scan list, hold
1
Close Quick Start, if required.
CAUTION
If you want to make or receive calls on this
new channel, you must add it to your scan
list.
to return to Quick Start.
Each time you enter Set scan list, the
resulting scan list overwrites the existing
scan list.
Using Quick Start
.
.
67