Codan NGT AR Getting Started Manual page 61

NGT Transceiver Getting Started Guide
Connecting a mobile NGT AR Voice or VR station
To connect a mobile NGT AR Voice or VR station:
1
Connect the lead from the handset and speaker connector
to the 10-way plug on the cable lead from the RF unit,
then secure the locking ring tightly into position.
1
Connect the plug of the handset cable to the
the handset and speaker connector, then secure the
locking ring tightly into position.
1
Connect the plug at the end of the speaker cable to the
socket on the handset and speaker connector, then
secure the cable by pushing it into the slot on the side of
the connector (see
1
Connect the plug at the end of the
the end of the
the locking ring tightly into position.
1
Connect the plug at the opposite end of the
socket located at the base of the antenna, then secure the
locking ring tightly into position.
Figure 4 on page
cable lead from the RF unit, then secure
Installation
socket on
46).
cable to the socket at
cable to the
51