Setting Your Station Self Address - Codan NGT AR Getting Started Manual

Setting your station self address

NGT Transceiver Getting Started Guide
When Quick Start is available, any self address
that you enter using this method replaces the
previous self address. If you want to enter more
NOTE
than one self address, and hence disable the
Quick Start features, see the reference material
on the enclosed CD.
To set your station self address:
1
Open Quick Start.
1
Scroll to Set my address, then press
1
Enter your station self address (maximum of 10 numeric
digits for Codan Selcall networks, or 15 upper-case/
numeric characters for ALE/CALM networks), then
press .
NOTE
1
Close Quick Start, if required.
For help with entering text see
Entering and editing
Using Quick Start
.
page 61,
text.
69